Mark Berly, the guest star of my VXLAN Technical Deep Dive webinar focused on VXLAN gateways. Here’s the first part of his presentation, explaining what VXLAN gateways are and where you’d need them.

Imagine you have a typical 2-tier data center network (because 3-tier is so last millennium): layer-2 top-of-rack switches redundantly connected to a pair of core switches running MLAG (to get around spanning tree limitations) and IP forwarding between VLANs.

Next thing you know, a rep from your favorite vendor comes along and says: “did you know you could connect all ToR switches into a virtual fabric and manage them as a single entity?” Is that a good idea?

When an IPv4/IPv6 host wants to send a packet to another host, it has to answer the following simple questions:

• Can I reach the destination IP address directly (is the destination on the same LAN/subnet)?
• If not, who will help me forward the packet (who is the first-hop router)?

In IPv4 world, the host can get all the information it needs through DHCP. In IPv6 world, things are way more complex (but also way more correct if you’re a theoretician).

Hamid sent me the following question:

I have already memorized (bad idea, BTW) that a loop can occur if FD < RD. Could you please tell me how a loop could occur assuming FD < RD and we ignore the feasibility condition.

I’ll use a simple three-router network (see the following diagram) to illustrate why EIGRP cannot figure out whether an alternate more expensive path could lead to a loop or not.

In the introductory part of the IPv6 security webinar, Eric Vyncke explained how the huge IPv6 subnet sizes won’t stop a determined attacker, but will make the task of network or security engineers trying to take host inventory much harder.

I’m constantly getting questions about the intricate interworking of various flags present in IPv6 Router Advertisement messages. Here’s a (hopefully comprehensive) summary taken primarily from RFC 4861.

In a comment to the Firewalls in a Small Private Cloud blog post I wrote “VXLAN is NOT a viable inter-DC solution” and Jason wasn’t exactly happy with my blanket response. I hope Jason got a detailed answer in the VXLAN Technical Deep Dive webinar, here’s a somewhat shorter explanation.

In the Clos Fabrics Explained webinar I focused on the Clos fabrics principles of operation and design options, and Brad Hedlund who graciously agreed to be my guest explained how you can use Dell Force10 switches to build them. In this video he’s describing a simple leaf-and-spine topology with 40GE uplinks.

An incredible amount of IPv6 deployment documents has been published as IETF drafts recently, amongst them:

• Operational security considerations for IPv6 networks
• Design guidelines for IPv6 networks
• Stateless IP/ICMP Translation in IPv6 Data Centre Environments (aka IPv6-only data centers)
• Enterprise IPv6 Deployment Guidelines

Enjoy ... and don’t forget to join the v6ops mailing list ;)

Kaage added a great comment to my Virtual Firewall Taxonomy post:

And many of physical firewalls can be virtualized. One physical firewall can have multiple virtual firewalls inside. They all have their own routing table, rule base and management interface.

He’s absolutely right, but there’s a huge difference between security contexts (to use the ASA terminology) and firewalls running in VMs.