Blog Posts in December 2024

Happy Holidays and All the Best in 2025!

Another year is almost gone, and it’s time for my traditional “I will disappear until mid-January” retreat (also, don’t expect me to read my email until I’m back).

I hope you’ll also be able to disconnect from the crazy pace of the networking world, forget the “AI will make networking engineers obsolete” shenanigans (hint: SDN did not), and focus on your loved ones. I would also like to wish you all the best in 2025!

I will probably get bored sometime in late December, so expect a few new netlab features in early January.

add comment

Worth Reading: Hard Truths about AI-assisted Coding

Addy Osmani published an excellent overview of the challenges of AI-assisted coding. They apply equally well to the “AI will generate device configurations for me” or “AI will troubleshoot my network” ideas (ignoring for the moment the impact of the orders-of-magnitude smaller training set), so it’s definitely worth reading.

I particularly liked the “‌AI is like having a very eager junior developer on your team” take, as well as the description of the “70% problem” (AI will get you 70% there, but the last 30% will be frustrating) – a phenomenon perfectly illustrated by the following diagram by Forrest Brazeal:

read more add comment

Use Disaggregated BGP Prefixes to Influence Inbound Internet Traffic

As much as I love explaining how to use BGP in an optimal way, sometimes we have to do what we know is bad to get the job done. For example, if you have to deal with clueless ISPs who cannot figure out how to use BGP communities, you might be forced to use the Big Hammer of disaggregated prefixes. You can practice how that works in the next BGP lab exercise.

Click here to start the lab in your browser using GitHub Codespaces (or set up your own lab infrastructure). After starting the lab environment, change the directory to policy/b-disaggregate and execute netlab up.

keep reading

IBGP Source Interface Selection Still Requires Configuration

A fellow networking engineer recently remarked, “FRRouting automatically selects the correct [IBGP] source interface even when not configured explicitly.”

TL&DR: No, it does not. You were just lucky.

Basics first1. BGP runs over TCP sessions. One of the first things a router does when establishing a BGP session with a configured neighbor is to open a TCP session with the configured neighbor’s IP address.

read more add comment

… updated on Friday, January 10, 2025 11:57 +0100

Is BGP PIC Edge an Oxymoron?

This blog post discusses an old arcane question that has been nagging me from the bottom of my Inbox for almost exactly four years. Please skip it if it sounds like Latin to you, but if you happen to be one of those readers who know what I’m talking about, I’d appreciate your comments.

Terminology first:

  • Prefix Independent Convergence allows entries in the forwarding table to point to shared next hops (or next-hop groups), reducing the FIB update bottleneck when changing the next hop for a large number of prefixes (for example, when dealing with a core link failure). More details in the initial blog post and PIC applicability to fast reroute.
  • PIC Edge (as defined by vendor marketing) is the ability to switch to a backup CE route advertised to a backup PE router before the network convergence is complete.

Here’s (in a nutshell) how PIC Edge is supposed to work:

read more see 4 comments
Sidebar