Category: Ansible

Ansible is great at capturing and using JSON-formatted data returned by REST API (or any other script or method it can invoke), but unfortunately some of us still have to deal with network devices that cannot even spell structured data or REST.

As I was trying to automate configuration deployment in a multi-router Cisco IOS lab, I got to a point where the only way of figuring out what was going on was to log commands on Cisco IOS devices. Not a big deal, but I hate logging into a dozen boxes and configuring the same few lines on all of them (or removing them afterwards).

Time for another playbook: this one can push one of many (configurable) configuration snippets to a group of Cisco IOS devices defined in an Ansible inventory file.

Over a month ago I decided to create a lab network to figure out how to solve an interesting Inter-AS MPLS/VPN routing challenge. Instead of configuring half a dozen routers I decided to develop a fully-automated deployment because it will make my life easier.

I finally got to a point where OSPF, LDP, BGP (IPv4 and VPNv4) and MPLS/VPN configurations are created, deployed and verified automatically.

While it’s relatively easy to create an Ansible inventory file to support a Vagrant-created virtual networking lab, it’s also utterly boring – a perfect job for an automation script. I’m positive there are a zillion solutions out there, but I decided to reinvent the wheel and get a bit of Python hands-on practice.

Most network automation tutorials out there assume you’re running Ansible on your workstation and accessing virtual machines via SSH ports mapped by Vagrant. That’s great if you’re an experienced Ansible/Python user; for a clunky beginner like myself it’s safer to run Ansible within a VM that can be destroyed and recreated in seconds.

I got several questions along the lines of “Do I need programming skills to attend the Building Network Automation Solutions course?”

Short answer: No.

Cisco VIRL is the ideal testing environment when you want to test your Ansible playbooks with various Cisco network operating systems (IOS, IOS XE, NX-OS or IOS XR). The “only” gotcha: how do you reach those devices from the outside world?

It was always possible to reach the management interface of devices running with VIRL, and it got even simpler with VIRL release 1.2.

One of the challenges traditional networking engineers face when starting their network automation journey is the “build or buy” decision: should I use a plethora of small open-source or commercial tools and components and build my own solution, or should I buy a humongous platform from a reassuringly-expensive $vendor.

Most of us were used to buying platforms ranging from CiscoWorks to HP OpenView (oops, Business Technology Optimization Software) or now Cisco’s NSO, so it’s natural that we’re trying to map this confusing new world into old patterns, leading to interesting discussions like the one I had during one of my workshops:

One of the attendees of my Building Next-Generation Data Center course asked this interesting question after listening to my description of differences between Chet/Puppet and Ansible:

For Zero-Touch Provisioning to work, an agent gets installed on the box as a boot up process that would contact the master indicating the box is up and install necessary configuration. How does this work with agent-less approach such as Ansible?

Here’s the first glitch: many network devices don’t ship with Puppet or Chef agent; you have to install it during the provisioning process.

I spent the last week creating numerous scenarios using Ansible networking modules for my upcoming Network Automation workshop. The scenarios use Cisco IOS and Nexus OS modules as I used VIRL for network simulation, but you could easily adapt them to other networking devices.

All the scenarios I’m covering in the workshop are available in my Github repository; to get the them explained you’ll have to attend the workshop. Enjoy!