Category: Data Center

Years ago Dan Hughes wrote a great blog post explaining how expensive TCP is. His web site is long gone, but I managed to grab the blog post before it disappeared and he kindly allowed me to republish it.

If you ask a CIO which part of their infrastructure costs them the most, I’m sure they’ll mention power, cooling, server hardware, support costs, getting the right people and all the usual answers. I’d argue one the the biggest costs is TCP, or more accurately badly implemented TCP.

An anonymous (for reasons that will be obvious pretty soon) commenter left a gem on my Disaster Recovery Test Faking blog post that is way too valuable to be left hidden and unannotated.

Here’s what he did:

Once I was tasked to do a DR test before handing over the solution to the customer. To simulate the loss of a data center I suggested to physically shutdown all core switches in the active data center.

That’s the right first step: simulate the simplest scenario (total DC failure) in a way that is easy to recover (power on the switches). It worked…

The March 2019 Packet Pushers Virtual Design Clinic had to deal with an interesting question:

Our server team is nervous about full-scale DR testing. So they have asked us to stretch L2 between sites. Is this a good idea?

The design clinic participants were a bit more diplomatic (watch the video) than my TL&DR answer which would be: **** NO!

Let’s step back and try to understand what’s really going on:

In my quest to understand how much buffer space we really need in high-speed switches I encountered an interesting phenomenon: we no longer have the gut feeling of what makes sense, sometimes going as far as assuming that 16 MB (or 32MB) of buffer space per 10GE/25GE data center ToR switch is another $vendor shenanigan focused on cutting cost. Time for another set of Fermi estimates.

Let’s take a recent data center switch using Trident II+ chipset and having 16 MB of buffer space (source: awesome packet buffers page by Jim Warner). Most of switches using this chipset have 48 10GE ports and 4-6 uplinks (40GE or 100GE).

Remember how Arista promoted VXLAN coupled with deep buffer switches as the perfect DCI solution a few years ago? Someone took Arista’s marketing too literally, ran with the idea and combined VXLAN-based DCI with traditional MLAG+STP data center fabric.

While I love that they wrote a blog post documenting their experience (if only more people would do that), it doesn’t change the fact that the design contains the worst of both worlds.

Here are just a few things that went wrong:

An attendee in my Building Next-Generation Data Center online course was asked to deploy numerous relatively small OpenStack cloud instances and wanted select the optimum virtual networking technology. Not surprisingly, every $vendor had just the right answer, including Arista:

We’re considering moving from hypervisor-based overlays to ToR-based overlays using Arista’s CVX for approximately 2000 VLANs.

As I explained in Overlay Virtual Networking, Networking in Private and Public Clouds and Designing Private Cloud Infrastructure (plus several presentations) you have three options to implement virtual networking in private clouds:

A good friend of mine who prefers to stay A. Nonymous for obvious reasons sent me his “how I lost my data center to a broadcast storm” story. Enjoy!

Small-ish data center with several hundred racks. Row of racks supported by an end-of-row stack. Each stack with 2 x L2 EtherChannels, one EC to each of 2 core switches. The inter-switch link details don’t matter other than to highlight “sprawling L2 domains."

VLAN pruning was used to limit L2 scope, but a few VLANs went everywhere, including the management VLAN.

We all know about catastrophic headline-generating failures like AWS East-1 region falling apart or a major provider being down for a day or two. Then there are failures known only to those who care, like losing a major exchange point. However, I’m becoming more and more certain that the known failures are not even the tip of the iceberg – they seem to be the climber at the iceberg summit.

Every time I’m running a data center-related workshop I inevitably get pulled into stretched VLAN and stretched clusters discussion. While I always tell the attendees what the right way of doing this is, and explain the challenges of stretched VLANs from all perspectives (application, database, storage, routing, and broadcast domains) the sad truth is that sometimes there’s nothing you can do.

In those sad cases, I can give the workshop attendees only one advice: face the reality, and figure out how badly you might fail. It’s useless pretending that you won’t get into a split-brain scenario - redundant equipment just makes it less likely unless you over-complicated it in which case adding redundancy reduces availability. It’s also useless pretending you won’t be facing a forwarding loop.

This is a guest blog post by Dave Crown, Lead Data Center Engineer at the State of Delaware. He can be found automating things when he's not in meetings or fighting technical debt.

Over the course of the last year or so, I’ve been working on building a solution to deploy and manage Cisco’s ACI using Ansible and Git, with Python to spackle in cracks. The goal I started with was to take the plain-text description of our network from a Git server, pull in any requirements, and use the solution to configure the fabric, and lastly, update our IPAM, Netbox. All this without using the GUI or CLI to make changes. Most importantly, I want to run it with a simple invocation so that others can run it and it could be moved into Ansible Tower when ready.