Category: podcast

After covering the details of PCEP protocol in the BGP-LS and PCEP Deep Dive webinar Julian Lucek focused on how a controller would use PCEP to build MPLS TE paths across a network.

Oh, and don’t forget to explore the rest of the PCEP webinar and other SDN webinars after watching the video ;)

A few months ago I met a number of great engineers from Avaya and they explained to me how they creatively use Shortest Path Bridging (SPB) to create layer-2, layer-3, L2VPN, L3VPN and even IP Multicast fabrics – it was clearly time for another deep dive into SPB.

It took me a while to meet again with Roger Lapuh, but finally we started exploring the intricacies of SPB, and even compared it to MPLS for engineers more familiar with MPLS/VPN. Interested? Listen to Episode 54 of Software Gone Wild.

Russ White made an excellent remark while discussing the news that the CloudRouter pushed 650 Gbps through commodity hardware: “If this is software defined networking, then we’ve been doing this since sometime in the 1990’s, perhaps even earlier…”

He’s absolutely right – the first routers (like AGS or IGS from Cisco) did all packet forwarding in software, so as I explained during the Introduction to SDN webinar while reaching dozens of gigabits with software-based packet forwarding is exciting, calling it SDN doesn’t make much sense.

A while ago Christer Swartz explained how a Palo Alto firewall integrates with VMware NSX. In the meantime, Palo Alto announced integration with Cisco ACI and OpenStack, and it was time for another podcast with Christer deep-diving into the technical details of these integrations.

Spoiler: It’s not OpFlex. For more details, listen to Episode 53 of Software Gone Wild

Some people conflate SDN with whitebox switches preferably running Linux. So what exactly is software-hardware disaggregation, and how do whitebox switches and third-party network operating systems fit into the bigger picture?

I tried to answer these questions in the SDN is not whitebox switching part of (free) Introduction to SDN webinar.

Imagine you want to have an IPv6-only access network and transport residual IPv4 traffic tunneled across it. Sounds great, but you need to terminate those tunnels and encapsulate/decapsulate IPv4 traffic at multi-gigabit rate.

There are plenty of reassuringly-expensive hardware solutions that can do that, or you could work with really smart people and get software-based solution that can do 20 Gbps per CPU core.

I spent the first half of the Introduction to SDN webinar explaining various attempts at defining SDN, and the obvious place to start was the centralized control plane mantra.

This part of the webinar is now public; to access the rest of the webinar, register on my web site.

Imagine you get a routing outage in your network resulting in three minutes of traffic blackholing. After a few tense minutes it goes away and life is good, but you desperately want to know what went wrong. Can you figure it out? Well, you could if you were using PacketDesign tools, as Cengiz Alaettinoglu explained on Episode 51 of Software Gone Wild.

A few months ago VMware launched NSX version 6.2, and I asked my friend Anthony Burke to tell us more about the new features. Not surprisingly, we quickly started talking about troubleshooting, routing problems, and finished with route-health-injection done with a Python script. The end result: Episode 50 of Software Gone Wild. Enjoy!

Julian Lucek did a fantastic job describing how NorthStar controller uses BGP-LS and PCEP, so I asked him whether he’d be willing to do a deep dive on these two topics. He gracefully agreed, and the results are already online.

A year and a half ago, Docker networking couldn’t span multiple hosts and used NAT with port mapping to expose container-based services to the outside world.

Docker is the hottest Linux container solution these days. Want to know more about it? Matt Oswalt is running Introduction to Docker webinar in a few days.

In August 2014 a small startup decided to change all that. Docker bought them before they managed to get public, and the rest is history.

The proponents of microsegmentation solutions would love you to believe that it takes no more than somewhat-stateful packet filters sitting in front of the VMs to get rid of traditional subnets. As I explained in my IPv6 Microsegmentation talk (links below), you need more if you want to have machines from multiple security domains sitting in the same subnet – from RA guard to DHCPv6 and ND inspection.

A while ago I watched a Networking Field Day Extra video in which Chris Young and Michael Zayats talked about HP’s open source initiative – they decided to build yet another open networking operating system.

Obviously I wanted to know more, reached out to Chris, and we quickly managed to set up an online chat resulting in Episode 48 of Software Gone Wild podcast.

Nick Buraglio used OpenDaylight and OpenFlow-enabled switches to build a part of the exhibition network of a large international supercomputing conference and was kind enough to talk about his real-life experience in Episode 47 of Software Gone Wild.

We covered:

When I wrote a blog post explaining the difference between centralized control and centralized control plane, John Casey, CEO of CPLANE Networks wrote a comment saying “yeah, that’s exactly what we’re doing.”

It took us a while to get the stars aligned, but finally we managed to sit down and chat about what they’re doing, resulting in Episode 46 of Software Gone Wild.