Worth Reading: Working with TC on Linux systems

Here’s one of the weirdest ideas I’ve found recently: patch together two dangling ends of virtual Ethernet cables with PBR.

To be fair, Jon Langemak used that example to demonstrate how powerful tc could be. It’s always fun to see a totally-unexpected aspect of Linux networking… even though it looks like the creators of those tools believed in Perl mentality of creating a gazillion variants of line noise to get the job done.

add comment

Summer Break 2020

Almost 30 webinars, an online course, and over 140 blog posts later it’s time for another summer break.

While we’ll do our best to reply to support and sales requests (it might take us a bit longer than usual), don’t expect anything deeply technical for the next two months… but of course you can still watch over 280 hours of existing content, listen to over 100 podcast episodes, or read over 3500 blog posts.

We’ll be back with tons of new content in early September.

In the meantime, automate everything, get away from work, turn off the Internet, and enjoy a few days in your favorite spot with your loved ones!

add comment

BGP Navel Gazing on Software Gone Wild

This podcast introduction was written by Nick Buraglio, the host of today’s podcast.

As we all know, BGP runs the networked world. It is a protocol that has existed and operated in the vast expanse of the internet in one form or another since early 1990s, and despite the fact that it has been extended, enhanced, twisted, and warped into performing a myriad of tasks that one would never have imagined in the silver era of internetworking, it has remained largely unchanged in its operational core.

The world as we know it would never exist without BGP, and because of the fact that it is such a widely deployed protocol with such a solid track record of “just working”, the transition to a better security model surrounding it has been extraordinarily slow to modernize.

read more see 1 comments

Adapting Network Design to Support Automation

This blog post was initially sent to the subscribers of my SDN and Network Automation mailing list. Subscribe here.

Adam left a thoughtful comment addressing numerous interesting aspects of network design in the era of booming automation hype on my How Should Network Architects Deal with Network Automation blog post. He started with:

A question I keep tasking myself with addressing but never finding the best answer, is how appropriate is it to reform a network environment into a flattened design such as spine-and-leaf, if that reform is with the sole intent and purpose to enable automation?

A few basic facts first:

read more see 2 comments

Security Aspects of Using Smart NICs

After I published the blog post describing how infrastructure cloud provides (example: AWS) might use smart Network Interface Cards (NICs) as the sweet spot to implement overlay virtual networking, my friend Christoph Jaggi sent me links to two interesting presentations:

Both presentations describe how you can take over a smart NIC with a properly crafted packet, and even bypass CPU on a firewall using smart NICs.

read more see 1 comments

Bridging Loops in Disaster Recovery Designs

One of the readers commenting the ideas in my Disaster Recovery and Failure Domains blog post effectively said “In an active/passive DR scenario, having L3 DCI separation doesn’t protect you from STP loop/flood in your active DC, so why do you care?

He’s absolutely right - if you have a cold disaster recovery site, it doesn’t matter if it’s bombarded by a gazillion flooded packets per second… but how often do you have a cold recovery site?

read more add comment

Worth Reading: Lessons Learned from 20 Years of Hype Cycles

Michael Mullany analyzed 20 years of Gartner hype cycles and got some (expected but still interesting) conclusions including:

  • Nobody noticed major technologies even when they were becoming mainstream
  • Lots of technologies just die, others make progress when nobody is looking
  • We might get the idea right and fail badly at implementation
  • It takes a lot longer to solve some problems than anyone expected

Enjoy the reading, and keep these lessons in mind the next time you’ll be sitting in a software-defined, intent-based or machine-learning $vendor presentation.

add comment

EVPN: The Great Unifying Theory of VPN Control Planes?

I claimed that “EVPN is the control plane for layer-2 and layer-3 VPNs” in the Using VXLAN and EVPN to Build Active-Active Data Centers interview a long long while ago and got this response from one of the readers:

To me, that doesn’t compute. For layer-3 VPNs I couldn’t care less about EVPN, they have their own control planes.

Apart from EVPN, there’s a single standardized scalable control plane for layer-3 VPNs: BGP VPNv4 address family using MPLS labels. Maybe EVPN could be a better solution (opinions differ, see EVPN Technical Deep Dive webinar for more details).

read more add comment

Network Reliability Engineering Should Be More than Software or Automation

This blog post was initially sent to the subscribers of my SDN and Network Automation mailing list. Subscribe here.

In late 2018 Juniper started aggressively promoting Network Reliability Engineering - the networking variant of concepts of software-driven operations derived from GIFEE SRE concept (because it must make perfect sense to mimic whatever Google is doing, right?).

There’s nothing wrong with promoting network automation, or infrastructure-as-code concepts, and Matt Oswalt and his team did an awesome job with NRE Labs (now defunct, huge “Thank you!” to whoever was financing them), but is that really all NRE should be?

read more add comment

SuzieQ with Dinesh Dutt and Justin Pietsch on Software Gone Wild

In early May 2020 I wrote a blog post introducing SuzieQ, a network observability platform Dinesh Dutt worked on for the last few years. If that blog post made you look for more details, you might like the Episode 111 of Software Gone Wild in which we went deeper and covered these topics:

  • How does SuzieQ collect data
  • What data is it collecting from network devices
  • What can you do with that data
  • How can you customize and extend SuzieQ
add comment

Example: Fully-Automated AWS Network Infrastructure Deployment

Regular readers of my blog probably remember the detailed explanations Erik Auerswald creates while solving hands-on exercises from our Networking in Public Cloud Deployments online course (previous ones: create a virtual network, deploy a web server).

This time he documented the process he went through to develop a Terraform configuration file that deploys full-blown AWS networking infrastructure (VPC, subnets, Internet gateway, route tables, security groups) and multiple servers include an SSH bastion host. You’ll also see what he found out when he used Elastic Network Interfaces (spoiler: routing on multi-interface hosts is tough).

add comment
Sidebar