Category: WAN

One of my long-time regular readers sent me this question:

I was wondering if you have had any interest in putting together an SD-WAN overview/update similar to what you do with data center fabrics where you cover the different product offerings, differentiators, solution scorecard…

That would be a good idea. Unfortunately the SD-WAN vendors aren’t exactly helping.

Here are the outlines of an interesting ExpertExpress discussion:

• A global organization wanted to connect data centers across the globe with a new transport backbone.
• All the traffic has to be encrypted.

Should they buy L2VPN and use MACsec on it or L3VPN and use GETVPN on it (considering they already have large DMVPN deployments in each region)?

One of my ExpertExpress design discussions focused on WAN network design and the need for OSPF areas and summarization (the customer had random addressing and the engineers wondered whether it makes sense to renumber the network to get better summarization).

I was struggling with the question of whether we still need OSPF areas and summarization in 2016 for a long time. Here are my thoughts on the topic; please share yours in the comments.

Eluehike Chedu asked an interesting question after my explanation of why stretched ACI fabric (or alternatives, see below) is the least horrible way of stretching a subnet: What about OTV?

Time to go back to the basics. As Dinesh Dutt explained in our Routing on Hosts webinar, there are (at least) three reasons why people want to see stretched subnets:

After I completed the LAN-over-RS-232 project, it was obvious (well, not in retrospect) that the solution to every problem must be Z80 computers connected with some crazy RS-232 wiring. A few years later we had to write an application to support rally races. Guess what the solution was ;)

Summer is a great time to do odd jobs that you always wanted to do but never found time for. One of mine: document the crazy stuff I’ve been doing decades ago. Starting point: how I got into networking in 1980s.

One of my readers sent me a lengthy email asking my opinion about his ideas for new data center design (yep, I pointed out there’s a service for that while replying to his email ;). He started with:

I have to design a DR solution for a large enterprise. They have two data centers connected via Fabric Path.

There’s a red flag right there…

Mark Baker left this comment on my Stretched Firewalls across Layer-3 DCI blog post:

Strange how inter-DC clustering failure is considered a certainty in this blog.

Call it experience or exposure to a larger dataset. Anything you build will eventually fail; just because you haven’t experienced the failure yet doesn’t mean that the system will never fail but only that you were lucky so far.

One of my readers read the Ars Technica article on ads communicating with other devices via ultrasound and wondered whether something similar could be done for IP.

Not surprisingly, someone already did it. A quick google search found this tutorial which explains how to run IP stack over Gnuradio (at speeds that were last experienced with dial-up modems 30 years ago).

I got this question from one of my readers (and based on these comments he’s not the only one facing this challenge):

I was wondering if you can do a blog post on Cisco's new ASA 5585-X clustering. My company recently purchased a few of these with the intent to run their cross data center active/active firewalls but found out we cannot do this without OTV or a layer 2 DCI.

A while ago I expressed my opinion about these ideas, but it seems some people still don’t get it. However, a picture is worth a thousand words, so maybe this will work: