Category: VXLAN

A while ago I wrote “vMotion over VXLAN is stupid and unnecessary” in a comment to a blog post by Duncan Epping, assuming everyone knew the necessary background details. I was wrong (again).

A networking engineer was trying to persuade me of importance of hardware VXLAN VTEPs. We quickly agreed physical-to-virtual gateways are the primary use case, and he tried to illustrate his point by saying “Imagine you have 1000 servers in your data center and you manage to virtualize 80% of them. How will you connect them to the other 200?” to which I replied, “That doesn’t make any sense.” Here’s why.

Brook Reams sent me an interesting tidbit: Brocade is the first vendor that actually shipped a VXLAN VTEP controlled by a VMware NSX controller. It’s amazing to see how Brocade leapfrogged everyone else (they also added tons of other new functionality in NOS releases 4.0 and 4.1).

Gordon sent me a whole list of NSX gateway questions:

• Do you need a virtual gateway for each VXLAN segment or can a gateway be the entry/exit point across multiple VXLAN segments?
• Can you setup multiple gateways and specify which VXLAN segments use each gateway?
• Can you cluster gateways together (Active/Active) or do you setup them up as Active/Standby?

The answers obviously depend on whether you’re deploying NSX for multiple hypervisors or NSX for vSphere. Let’s start with the former.

Got a really interesting question from A. Reader: “When and how does VXLAN use IGMP and PIM in transport (underlay) networks?”

Obviously you need IGMP and PIM in multicast environments only (vCNS 5.x, Nexus 1000V in multicast mode).

The long-promised unicast-only VXLAN has finally shipped with the Nexus 1000V release 4.2(1)SV2(2.1) (there must be some logic behind those numbers, but they all look like madness to me). The new Nexus 1000V release brings two significant VXLAN enhancements: unicast-only mode and MAC distribution mode.

VXLAN, one of the first MAC-over-IP (overlay) virtual networking solutions is definitely a major improvement over traditional VLAN-based virtual networking technologies … but not without its own scalability limitations.

Mark Berly spent plenty of time explaining the in-depth intricacies of VXLAN-to-VLAN gateways during our VXLAN Technical Deep Dive webinar. He’s obviously heavily immersed in this challenge and hits 9+ on the Nerd Meter, so you might have to watch the video a few times to get all the nuances. What can I say – we’ll have fun times in the coming years ;)

Mark Berly, the guest star of my VXLAN Technical Deep Dive webinar focused on VXLAN gateways. Here’s the first part of his presentation, explaining what VXLAN gateways are and where you’d need them.

In a comment to the Firewalls in a Small Private Cloud blog post I wrote “VXLAN is NOT a viable inter-DC solution” and Jason wasn’t exactly happy with my blanket response. I hope Jason got a detailed answer in the VXLAN Technical Deep Dive webinar, here’s a somewhat shorter explanation.