Every time I mention unnumbered BGP sessions in a webinar, someone inevitably asks “and how exactly does that work?” I always replied “gee, that’s a blog post I should write one of these days,” and although some readers might find it long overdue, here it is ;)

We’ll work with a simple two-router lab with two parallel unnumbered links between them. Both devices will be running Cumulus VX 4.4.0 (FRR 8.4.0 container generates almost identical printouts).

In October 2022 I described how you could build a VLAN router-on-a-stick topology with netlab. With the new features added in netlab release 1.4¹ we can do the same for VXLAN-enabled VLANs – we’ll build a lab where a router-on-a-stick will do VXLAN-to-VXLAN routing.

Geoff Huston published a fantastic history of fiber optics cables, from the first (copper) transatlantic cable to 2.2Tbps coherent optics. Have fun!

After discussing network addressing and switching, routing, and bridging in the How Networks Really Work webinar, it was high time for a deep dive into routing protocols, starting (as always) with an overview.

Bela Varkonyi left two intriguing comments on my Leave BGP Next Hops Unchanged on Reflected Routes blog post. Let’s start with:

The original RR design has a lot of limitations. For usual enterprise networks I always suggested to follow the topology with RRs (every interim node is an RR), since this would become the most robust configuration where a link failure would have the less impact.

He’s talking about the extreme case of hierarchical route reflectors, a concept I first encountered when designing a large service provider network. Here’s a simplified conceptual diagram (lines between boxes are physical links as well as IBGP sessions between loopback interfaces):

There’s no better way to start this blog post than with a widespread myth: we don’t need MLAG now that most vendors have implemented EVPN multihoming.

TL&DR: This myth is close to the not even wrong category.

As we discussed in the MLAG System Overview blog post, every MLAG implementation needs at least three functional components:

During the discussion of the On Applicability of MPLS Segment Routing (SR-MPLS) blog post on LinkedIn someone made an off-the-cuff remark that…

SRv6 as an host2host overlay - in some cases not a bad idea

It’s probably just my myopic view, but I fail to see the above idea as anything else but another tiny chapter in the “Solution in Search of a Problem” SRv6 saga¹.

The big three features of the netlab release 1.4.0 are:

• EVPN asymmetric IRB on Arista EOS, Cumulus Linux, Dell OS10, Nokia SR Linux, Nokia SR OS and VyOS
• Anycast gateway on Arista EOS, Cumulus Linux, Nokia SR OS and Nokia SR Linux
• VRRP on Arista EOS, Cisco IOSv/CSR, Cisco Nexus OS, Cumulus Linux and Nokia SR OS

We also added tons of new functionality, including:

Mark Seery wrote a fantastic must-read article explaining why routing will never be a solved problem.

You might want to enjoy it as a relaxing antidote after a painful exposure to SD-WAN (or SD-something-else) brainwashing.

After starting the EVPN multihoming versus MLAG presentation (part of EVPN Deep Dive webinar) with the taxonomy of EVPN-based multihoming, Lukas Krattiger did a deep dive into its intricacies including:

• EVPN route types needed to support multihoming
• A typical sequence of EVPN updates during multihoming setup
• MAC multipathing, MAC aliasing, split horizon and mass withdrawals
• Designated forwarder election