One of my readers has noted an interesting load-balancing behavior: when he was running traceroute tests from various routers in a topology similar to the one displayed below, the traceroute outputs indicated per-packet load balancing (both paths were used) when they were initiated from R2 or R3, but used a single path when initiated from R1 or R4.

 

I've always believed that you need to teach your students (more so if they are engineers) how things work, so they'll be able to understand why they do things they way they do them. It seems to me, though, that the training courses I'm seeing veer ever more toward overviews and recipes ... but there are a few things you can do on your own.

To display bandwidths of all interfaces configured on the router use show interface | include protocol|BW command.

End-to-end troubleshooting of MPLS VPN solutions is one of the more complex network troubleshooting tasks. On top of several sophisticated technologies and protocols used in MPLS VPN solutions, we have to deal with customer-to-provider interaction on the IP routing protocol level, which makes the troubleshooting efforts even more convoluted.

To minimize the impact of your customers on your troubleshooting efforts, you might want to start with the PE-to-PE troubleshooting. When used as the first step in your troubleshooting process, the PE-PE tests will bypass customer errors, intra-site customer routing problems, PE-CE interactions, and route redistribution issues.

In one of the MPLS-related posts, I’ve described the role of implicit NULL in penultimate hop popping (PHP). To make the distinction between implicit and explicit NULL even clearer, I’ve prepared a short explanation with corresponding diagrams.

To display IP addresses assigned to router’s interfaces (excluding interfaces with no IP address) use show ip interface brief | exclude unassigned command.

The RFC 3101 (OSPF NSSA Option) states:

In addition, an NSSA border router should originate a default LSA (IP network is 0.0.0.0/0) into the NSSA. Default routes are necessary because NSSAs do not receive full routing information and must have a default route in order to route to AS-external destinations.

I am pretty sure IOS inserted the type-7 default route into an NSSA area when the NSSA feature was introduced.

The Thinking problem management! blog had an interesting article on The Leaky VLANs myth, quoting a test report from SANS Institute that documents how you can inject frames into other VLANs even if you're not connected to a trunk port. The report is eight years old (so one would hope this issue has been fixed in the meantime), but there's another question you should ask yourself is: what happens when you lose the configuration of the switch (and I've seen devices losing configuration after a power glitch). If you're using a router to perform L3 switching, no harm is done; a router with empty configuration forwards no packets. But if you're using a low-end switch, you're in deep trouble; by default, a switch forwards packets between all ports ... and if you use static IP addresses on all subnets, you won't even notice they're connected. If you want to be very safe, you're better off having a different set of switches for the inside and the outside zones of your firewall.

If you’ve ever had the “privilege” of buying equipment from a large systems integrator (or directly from a large vendor), you’re probably familiar with this process:

A while ago I've documented how you can cope with DHCP clients that do not send Client identifier (DHCP option 61) in their DHCP Discover/Request messages, but some people are still trying to persuade me that the client-identifier pool configuration command should work. I really wanted to be sure I hadn't missed something, so I started Wireshark and captured the actual DHCP Discover packet generated by a Linux host: