IOS release 15.0
This is not an April 1st post: I’ve just realized that Cisco quietly released IOS 15.0M (mainstream). Haven’t tested it yet, but the images for a large variety of platforms are already available on CCO. The new features listed in the documentation include:
- Full BFD support, including static routes, BFD-in-VRF and BFD-over-Frame Relay (next step: test it on a 2800-series router);
- DHCP authentication;
- DMVPN tunnel health monitoring;
- EEM 3.1 (whatever that is, the EEM documentation hasn’t been updated yet);
- Interaction between IS-IS and LDP;
- BGP local convergence in MPLS VPN networks (the feature has already been available in 12.2 SRC, now it’s available on more platforms);
- OSPF graceful shutdown and OSPF TTL security check features are available on more platforms;
- Intra-zone traffic inspection in zone-based firewall.
It looks like (as expected) the 15.0 release is a grand merge of all previous IOS trains (with a few extra features). Good job; finally we have something new to play with :)
I'm not sure the DMVPN if-state monitoring guff is perfect yet (i had to shut/no-shut the tunnel yesterday on my test router to bring it back up), but looks interesting.
Oh, and IPS is now forcibly licensed (no surprise, given the existence of those "with IPS" maintenance SKUs already).
Did you also notice the 1900/2900/3900-series routers on the software download page?
1941
2901 2911 2921 2951
3925 3945
=-O
MWR 1941 was EoS since 2003. Last support 2009
ISR1941 is the new one.
c7200p-adventerprisek9-mz.124-24.T2.bin
c7200p-adventerprisek9-mz.124-4.XD11.bin
c7200p-adventerprisek9-mz.122-33.SRC1.bin
unpacked thease file
GNS 3.72 support NPE-G2 and boot , no problem
image = /Users/xxxxxxxx/Documents/Dynagen/images/c7200p-adventerprisek9-mz.124-4.XD8.bin
ram = 256
nvram = 1024
disk0 = 64
disk1 = 64
confreg = 0x2102
mmap = true
midplane = vxr
npe = npe-g2