The primary mission of Border Gateway Protocol (BGP) (transport of Internet routing between ISPs) has influenced the implementation of BGP default route origination, advertisements and propagation. This article describes the functionality and caveats of BGP default routing. All router configurations and printouts are taken from a sample network illustrated in the following diagram:
Default Route Origination in BGP
Contrary to some other routing protocols, you cannot redistribute default route (0.0.0.0/0) from the IP routing table into BGP.
For example, if PE-A has a static default route …
PE-A#show ip route static | begin Gateway Gateway of last resort is 10.0.7.6 to network 0.0.0.0 S* 0.0.0.0/0 [1/0] via 10.0.7.6 10.0.0.0/8 is variably subnetted, 31 subnets, 3 masks S 10.2.17.0/24 [1/0] via 10.0.1.6
… and you have configured redistribution of static routes into BGP …
router bgp 65000 address-family ipv4 network 10.0.1.1 mask 255.255.255.255 redistribute static
… the default route will not appear in the BGP table (but all other static routes will).
PE-A#show ip bgp | include Network|32768 Network Next Hop Metric LocPrf Weight Path *> 10.0.1.1/32 0.0.0.0 0 32768 i *> 10.2.17.0/24 0.0.0.0 0 32768 ?
To originate the default route into the BGP table you should use the network statement:
router bgp 65000 address-family ipv4 network 0.0.0.0
After the network statement for the default route has been configured, BGP inserts the prefix 0.0.0.0/0 into the BGP table:
PE-A#show ip bgp | include Network|32768 BGP table version is 13, local router ID is 10.0.1.1 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-fa Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path *> 0.0.0.0 0.0.0.0 0 32768 i *> 10.0.1.1/32 0.0.0.0 0 32768 i *> 10.2.17.0/24 0.0.0.0 0 32768 ?
Default Route Propagation
Once the default route has been inserted in the BGP table, the router propagates it like any other IP prefix. For example, after the default route has been inserted in the BGP table of PE-A, it’s automatically propagated to Site-A. The following printout also illustrates that the Site-A router has received the default route from PE-A as well as through PE-B and Site-B routers; the default route is thus propagated on IBGP and EBGP sessions.
Site-A#show ip bgp 0.0.0.0 BGP routing table entry for 0.0.0.0/0, version 13 Paths: (2 available, best #2, table Default-IP-Routing-Table) Flag: 0x820 Advertised to update-groups: 1 65000 10.0.8.2 from 10.0.8.2 (10.0.1.4) Origin IGP, localpref 100, valid, internal 65000 10.0.7.5 from 10.0.7.5 (10.0.1.1) Origin IGP, metric 0, localpref 100, valid, external, best
Default Route in Outbound Advertisement
In most design scenarios, you’d like to advertise the BGP default route to EBGP neighbors without having a BGP default route in your own BGP table. For example, an ISP might decide to advertise only the BGP default route and local BGP networks to customers multi-homed to a single ISP. To advertise a BGP default route to a BGP neighbor, use the neighbor default-originate router configuration command.
For example, when the IP prefix 0.0.0.0/0 is removed from the BGP table with the no network command and the default route advertisement is configured on EBGP session from PE-A to Site-A …
router bgp 65000 address-family ipv4 no network 0.0.0.0 neighbor 10.0.7.6 default-originate
… Site-A still receives the default route.
Site-A#show ip bgp 0.0.0.0 BGP routing table entry for 0.0.0.0/0, version 16 Paths: (1 available, best #1, table Default-IP-Routing-Table) Flag: 0x820 Advertised to update-groups: 1 65000 10.0.7.5 from 10.0.7.5 (10.0.1.1) Origin IGP, metric 0, localpref 100, valid, external, best
Conditional Default Route Advertisement
The unconditional default route advertisement from PE router to CE routers could lead to traffic black holes. If PE-A loses connectivity to the network core (see the next diagram) but still advertises the default route to Site-A, it will attract the traffic from AS 65100 and subsequently drop it due to failed uplink. It’s thus best to configure conditional advertising of the BGP default route to BGP neighbors.
In the sample network, the presence of the IP prefix 10.0.1.8/32 originated in AS 65104 indicates that the core network is available. To configure conditional BGP default route advertisement, you have to:
- Configure an IP access list or IP prefix list that exactly matches the desired IP prefix in the IP routing table.
ip prefix-list CoreNet seq 5 permit 10.0.1.8/32
- Configure a route map using the access list or prefix list to match the IP prefix. The route map can contain other match clauses. In our example, it also matches the AS path with an AS-path access list:
route-map Default_From_65104 permit 10 match ip address prefix-list CoreNet match as-path 100 ! ip as-path access-list 100 permit _65104$
- Configure conditional advertising of the default route with the neighbor default-originate route-map configuration command.
router bgp 65000 address-family ipv4 neighbor 10.0.7.6 default-originate route-map Default_From_65104