Build the Next-Generation Data Center
6 week online course starting in spring 2017

STP in Brocade VCS Fabric – an Interesting Solution after a Long Wait

A few years ago I lambasted the lack of STP support in Brocade’s VCS fabric. It took Brocade over two years to solve the problem, but they finally came up with an interesting end-to-end solution.

Here are a few highlights; for more details read the Configuring STP-type Protocols section in Network OS Administrator Guide.

IPv6-Only Data Center Deployment

Last June Tore Anderson talked about his IPv6-only data center deployment (the idea made very popular recently after Facebook’s presentation @ V6 World Congress) in one of my free webinars. In case you missed the videos explaining the technical details, watch them or view Tore’s slide deck.

What Happened to “Be Conservative in What You Do”?

A comment by Pieter E. Smit on my vSphere Does Not Need LAG Bandaids post opened yet another can of worms: vSphere behavior on uplink recovery.

Short summary: vSphere starts using an uplink as soon as its physical layer becomes operational, which might happen during ToR switch startup phase, or before a ToR switch port enters forwarding state.

New webinar: Following Packets across Overlay Virtual Networks

Even though I’ve been talking and writing about various overlay virtual networking solutions for years (overview, Hyper-V, Amazon VPC, VMware NSX layer-2 and layer-3 gateways), there are still questions along the lines of “how does a packet get from A to B”, so Ethan Banks asked me to do a 1-hour session at upcoming Interop in Las Vegas.

Expanded version of the same presentation will be available as an update session to all current and future attendees of Overlay Virtual Networking webinar:

Facebook Is Close to Having an IPv6-only Data Center

Whenever I mention the idea of IPv6-only data centers, I get the usual question: “Sounds great, but is anyone actually using it?” So far, my answer was: “Yeah, I know a great guy in Norway that runs this in production” As of last week, the answer is way more persuasive: “Facebook is almost there.

Thank you, Troopers!

I spent the whole last week immersed into security-spiced atmosphere of Troopers, a fantastic boutique security conference (like last year, they limited the number of attendees and sold out weeks before the conference).

I admit they totally spoiled me last year, but they managed to make the conference and all the accompanying events even better.

Real-life OpenFlow Deployments

Talking about OpenFlow (and poking holes in it) is fun, but are there any real-life deployments (apart from highly-publicized Google’s internal network)? I tried to describe a few of them in my SDN 101 webinar.

Microsoft is using tap aggregation network in production, and I forgot to mention OpenFlow-based New Zealand IXP.

Watch the video

Cisco IOS Supports RFC 6106 (RDNSS)

When Enno Rey mentioned RFC 6106 support (why does it matter?) on Cisco IOS during the opening presentation of Troopers 2014 IPv6 security summit I got interested but remained a bit skeptical. When Eric Vyncke (sitting in the audience) started nodding, I knew it must be there. Finding the feature in IOS documentation turned out to be mission impossible.

Per-packet Load Balancing Interferes with TCP Offload

A reader left the following comment on my Does Multipath TCP Matter blog post: “Why would I use MP-TCP in a data center? Couldn’t you use packet spraying at each hop and take care of re-ordering at the destination?

Short answer: You could, but you might not want to.

We’re All Brothers on Link-Local

I was listening to excellent opening presentation Enno Rey had at Troopers 2014 IPv6 security summit (he claimed he was ranting, but it sounded more like some of my polite blog posts) and when I’ve seen this slide I could literally hear a blog post clicking together in my head.

In short: IPv6 has many shortcomings, but this might not be one of them.

Scaling BGP-Based DMVPN Networks

Cristiano sent me an interesting question:

I saw that to configure BGP as the routing protocol running over DMVPN I have to configure BGP neighbors on the hub site router. Do I really have to configure all the neighbors on the hub site? How many neighbors could I configure? How can I scale that?

According to Cisco Live presentations, BGP-over-DMVPN scales to several thousand spoke sites (per hub router), so you shouldn’t be too worried about the protocol scalability. Configuring all those neighbors is a different issue.

The Fundamental Problem of IT Industry

The best description of fundamental problems of IT industry I found recently comes from @cloud_borat. Evidently SDN is no different.

Scale-Out Load Balancing with OpenFlow

When OpenFlow was still fresh and exciting, someone made quite a name for himself by proposing a global load-balancing solution that would install per-session OpenFlow entries in every core switch around the world. Clearly a great idea, mimicking the best experiences we had with ATM SVCs.

Meanwhile some people started using OpenFlow in real-life networks for coarse-grained load balancing that improves the scalability of stateful network services. For more details, watch the video recorded during the Real Life OpenFlow-based SDN Use Cases webinar.

MPLS Requires Custom Silicon. Really?

I heard the following pretty bold statement while listening to an episode of my favorite podcast: “Bringing MPLS into the data center is impractical because MPLS requires custom silicon.” Really? How about checking the Intel FM 6000 product brief first?

Broadcom Trident chipset supposedly also supports MPLS. I couldn’t verify that because Broadcom considers the capabilities of their hardware highly confidential (but if you know more, do write a comment). Absolutely refreshing for a chipset that you get in almost every ToR switch you buy.

Can We Use IPv6 Router Advertisements for Fast Failover?

Ed Horley opened another juicy can of worms in a comment to my First-Hop Load Balancing in IPv6 post: can we use IPv6 RA for fast failover (and high availability)?

TL&DR summary: it depends.

The Fundamental Difference between Phase 2 and Phase 3 DMVPN

DMVPN networks still confuse some engineers, particularly the true differences between Phase 2 and Phase 3 DMVPN. Here’s the explanation that worked for an engineer that sent me a question along these lines.

IPv6 High Availability Strategies – Workshop and Webinar

IPv6 is almost a direct replacement for IPv4, so it should be a no-brainer to implement high-availability services on top of IPv6 once you get the basic IPv6 end-to-end connectivity… until you start digging into dirty details as I did while preparing for the IPv6 High Availability Strategies workshop I’m running in a week @ Troopers 14.

Review of my TCP, HTTP and SPDY Deep Dive Course

A while ago, D.L. Owens published a very nice review of my TCP, HTTP & SPDY Deep Dive course, one of my most successful projects with more than 5000 enrolled students. Thank you!

OpenFlow 101 Video

New to the OpenFlow/SDN discussions? Interested in the reality behind the ever-growing hype? Check out the OpenFlow 101 video recorded during the SDN, NFV and OpenFlow for Skeptics webinar.

SDN Workshop @ Troopers 2014

If you plan to attend the Troopers 2014 conference in two weeks, don’t forget to include my full-day SDN workshop on Tuesday in your agenda (the Troopers conference is sold out, but you can still register for the workshop). The topics of the workshop will include:

  • Why do we need SDN and what is it?
  • OpenFlow, its advantages, drawbacks and scalability challenges;
  • Typical OpenFlow and SDN deployment considerations;
  • Real-life SDN use cases, both OpenFlow- and non-OpenFlow ones;
  • Network function virtualization;
  • Software-defined data centers.

For more details, check out the workshop description; for other SDN-related materials visit my SDN Resources page.

Whose Failure Domain Is It?

Draco made a valid comment to my Keep Your Failure Domain Small post:

What could a small ISP do to limit failure domains? Metro Ethernet and MPLS Virtual Private LAN service are all the rage, and offers customers the promise of being able to connect all their branch offices together, and use the same set of VLANs with free Layer 2 connectivity between their sites. It's either: extend the failure domains, or lose out in selling the service, b/c the customer will buy from another ISP.

Well, your customer’s failure domain doesn’t have to be yours.

Network Automation: Just Do It!

On the very same day that I published the CLI is Not the Problem post I stumbled upon an interesting discussion on the v6ops mailing list. It all started with a crazy idea to modify BGP to use 128-bit router ID to help operators that think they can manually configure large IPv6-only networks without any centralized configuration/management authority that would assign 32 bit identifiers to their routers.

The discussion quickly deteriorated into you really need a provisioning system and in one of the responses Jared Mauch provided a link to a NANOG presentation by Shawn Morris from NTT.

iOS uses Multipath TCP – Does It Matter?

When Apple launched the new release of iOS last autumn, networking gurus realized the new iOS uses MP-TCP, a recent development that allows a single TCP socket (as presented to the higher layers of the application stack) to use multiple parallel TCP sessions. Does that mean we’re getting closer to fixing the TCP/IP stack?

TL&DR summary: Unfortunately not.