Phase 2: Upload text files through a Telnet session

In a previous post, I've described how you can use Tcl shell to upload text content into router's flash if the router has no connectivity to a suitable file server (or you don't have FTP or TFTP server handy).

The trick works flawlessly, but typing the same obscure Tcl commands gets tedious after a while, so the first time I had to use this solution to develop a Tcl script, I've quickly written another script that takes file name as the parameter and hides all the other murky details.

To use it, transfer the contents of storeFile.tcl (available from my web site) to the router's flash (using the previously described trick), follow the installation instructions in the source and you're ready to go.

Note: You can adapt the Tcl script to your needs; for example, you could add instructions to re-register EEM Tcl policy every time you upload the new code.

1 comment:

  1. Hi, When I try to open a file in
    RDWR mode, I get error when reading like:

    error reading "file0": Unknown error 2577
    But opening in readonly mode is fine.
    Is it not possible to read and write file on disk [disk0:]


You don't have to log in to post a comment, but please do provide your real name/URL. Anonymous comments might get deleted.

Ivan Pepelnjak, CCIE#1354 Emeritus, is an independent network architect. He has been designing and implementing large-scale data communications networks as well as teaching and writing books about advanced technologies since 1990. See his full profile, contact him or follow @ioshints on Twitter.