SDN/SDDC Retreat in Miami, Florida (November 4th-6th)
Separate SDN hype from real life!

Perfect load balancing with MPLS Traffic Engineering

In the article Perfect Load-Balancing: How Close Can You Get?, you'll find in-depth information on how you can use MPLS traffic engineering to load-balance traffic in highly redundant designs.

2 comments:

  1. hot to load balance an mpls enabled label packet

    ReplyDelete
  2. No problem. Read the article; it describes an MPLS TE solution. Just make sure you configure "mpls ip" on the tunnel interfaces and the MPLS packets will also be load-balanced based on their IP content.

    ReplyDelete

You don't have to log in to post a comment, but please do provide your real name/URL. Anonymous comments might get deleted.

Ivan Pepelnjak, CCIE#1354 Emeritus, is an independent network architect. He has been designing and implementing large-scale data communications networks as well as teaching and writing books about advanced technologies since 1990. See his full profile, contact him or follow @ioshints on Twitter.